Wednesday, November 20, 2019
Home > Program > How make use of a Dimm in HP Proliant Dl60 G9 Server?

How make use of a Dimm in HP Proliant Dl60 G9 Server?

The HPE ProLiant DL60 Gen9 Server posseses an affordable design in the 1U rack space and smaller sized sized sized chassis, about 2 Intel® Xeon® E5-2600 v3/v4 processors, and eight DIMM slots of HPE DDR4 SmartMemory to satisfy fundamental computing needs in the reasonable cost point.

Just one-rank DIMM has some memory chipswith convenience while conntacting or studying inside the memory. . A quad-rank DIMM is, effective and efficient as two dual-rank DIMMs on a single module. A dual-rank DIMM resembles have two single-rank DIMMs on a single module, with simply one rank obtainable in a particular time.

Quad – and dual -rank DIMMs give you the finest capacity while using the available memory technology.

When conntacting or studying inside the DIMM, the server memory control subsystem picks the very best rank inside the DIMM.

LRDIMMs are marked as quad- or dual- rank DIMMs. You will find four or maybe more ranks of DRAM across the DIMM, nonetheless the LRDIMM buffer produces an abstraction that enables the DIMM to become dual-rank DIMM somewhere.

Standard DIMM slot population rules :

Install DIMMs after installing the attached processor .

When multiple processors are situated up, install the DIMMs across all processors .

White-colored-colored-colored DIMM slots mark the first slot in the funnel (Ch 1-A, Ch 2-B, Ch 3-C, Ch 4-D…).

Never mix RDIMMs and LRDIMMs.

While installing multiple processors , the DIMMs must be put into alphabetical consecutive order: P1-A, P2-A… P4-A, P1-B, P2-B… P4-B, P1-C, P2-C… P4-C, and so forth.

DIMM slots population order:

LRDIMM: Sequentially in the to z (A through L)

RDIMM: Sequentially in the to z (A through L)

DIMM handling guidelines:

Avoid electrostatic discharge

Feel, as this the connectors within the base within the DIMM.

Always hold DIMMs using the side edges only

Feel, as this the components across the sides within the DIMM

Never wrap the fingers around a DIMM.

Never bend or flex the DIMM.

Installing a DIMM:

First, we must Power lower the server using the press and release the ability On/ Standby button or use a virtual power button selection through iLO. Before continueing, verify the unit power Introduced is ambering , what this means is the server reaches standby mode .

Disconnect all cords inside the power source plus the server.

When the server has thumbscrew rack ears to protect the server faceplate for that front within the server , release the captive thumbscrews then eliminate the server within the server by sliding.

When the server has quick-release latch rack ears on sides within the server then open the latches. Use a T-25 Torx screwdriver to create the shipping screws and slide the server within the rack .

Open the access panel latch, slide the access panel for that back side within the chassis, then eliminate the access panel.

Use a T-15 Torx screwdriver to unlock the latch ,when the access panel latch is locked.

Open the DIMM slot latches and install the DIMM in Sequentially in the to z.

Open the DIMM slot and align the DIMM perfectly within the slot, then seat the DIMM by using two fingers to carry the DIMM within the side edges

To put the DIMM, use two fingers to utilize gentle pressure crazy DIMM.

Then install the access panel

Connect all cords for that server and to the ability source.

Switch on the server by pressing the ability On/Standby button.

After installing the DIMMs, use RBSU to configure memory protection mode.

Operated as much as two Apple Xeon E5-2600 v3/v4 processors, around four LFF HPE SmartDrives, and eight HPE DDR4 SmartMemory DIMM slots within the 1U compact and smaller sized sized sized footprint chassis, the DL60 Gen9 Server with Navigator systems server AMC offers a ideal solution for , network, compute and database nodes to help data-centric messaging data-centric collaboration, data-centric messaging, and cloud-computing needs.

Navigator systems offers support and maintenance for HPE ProLiant DL60 Gen9 Server while using proper performance,density, and manageability needed for collaboration, file and print, messaging workloads and cloud environments.

Leave a Reply

Your email address will not be published. Required fields are marked *